<readme.txt>
===============================================================================
License Agreement
===============================================================================

The license agreement for this software (hereinafter referred to as the
SOFTWARE) is described as follows.

1. Intellectual property rights in the SOFTWARE shall remain in FUJIFILM Business  
   Innovation Corp.(hereinafter referred to as FUJIFILM) as well as the original
   copyright holders.

2. The SOFTWARE can only be used with compatible FUJIFILM products
   (hereinafter referred to as the COMPATIBLE PRODUCTS) within the country of
   purchase of the COMPATIBLE PRODUCTS.

3. You are required to abide by the notes and restrictions (hereinafter referred
   to as the NOTES AND RESTRICTIONS) declared by FUJIFILM while using the
   SOFTWARE.

4. You are not permitted to alter, modify, reverse engineer, decompile or
   disassemble the whole or any part of the SOFTWARE for the purpose of
   analyzing the SOFTWARE.

5. You are not permitted to distribute the SOFTWARE on a communication network,
   or transfer, sell, rent or license the SOFTWARE to any third party by
   duplicating the SOFTWARE on any media such as floppy disk or magnetic tape.

6. FUJIFILM, FUJIFILM Channel Partners, Authorized Dealers and the original
   copyright holders of the SOFTWARE shall not be liable for any loss or damage
   arising from matching of hardware or program that are not specified in the
   NOTES AND RESTRICTIONS of the SOFTWARE, or any modification to the SOFTWARE.

7. FUJIFILM, FUJIFILM Channel Partners, Authorized Dealers and the original
   copyright holders of the SOFTWARE shall not be responsible for any warranty
   or liability with respect to the SOFTWARE.
   
*******************************************************************************
ApeosWide TIFF Driver  Ver.1.12.1
Readme
(C) FUJIFILM Business Innovation Corp. 1997-2021
*******************************************************************************

1. Preface

  This software is a driver for output from an application program running on 
  English Microsoft(R) Windows(R) OS listed below to FUJIFILM DocuWide printer.

1.1 Environment
   [32bit]
    -English Microsoft(R) Windows(R) 8.1
    -English Microsoft(R) Windows(R) 10

   [64bit]
    -English Microsoft(R) Windows Server(R) 2012
    -English Microsoft(R) Windows(R) 8.1 x64
    -English Microsoft(R) Windows Server(R) 2012 R2
    -English Microsoft(R) Windows(R) 10 x64
    -English Microsoft(R) Windows Server(R) 2016
    -English Microsoft(R) Windows Server(R) 2019

1.2 Printer (Driver name)
    -FF ApeosWide 3030
    -FF ApeosWide 6050
    -FF W001 for DocuWide 2055
    -FF W001 for DocuWide 3030
    -FF W001 for DocuWide 3035
    -FF W001 for DocuWide 3037
    -FF W001 for DocuWide 6055/6035
    -FF W001 for DocuWide 6057
     Hereinafter referred to as AW3030.

     *DocuWide 3035 / 3037 / 6057 / AW3030 / AW6050 can set up the network  
     printer via IPv6 address.


2. Recommended PC Requirements
        CPU             It depends on recommended system configuration of OS
        Memory          It depends on recommended system configuration of OS

   [32bit]
    This driver supports only an Intel i386 base personal computer.

   [64bit]
    This driver supports only an AMD64 / EM64T-base personal computer. IA-64 
    processor is not supported. 


3. Installation / Uninstallation of the Driver

  *Note
    - Log in as Administrator when install / uninstall the driver.
    - Immediately reboot the computer after installation / uninstallation of 
      the driver. 
    - Drivers cannot be updated or added if you are using the shared printer.
      You need to uninstall all the drivers of former versions before installing 
      a new one.
    - Driver install tool is required for the version upgrading of this driver. 
   You need to uninstall the older version before installing the new one.
   Refer to 1.2 Printer for details.
   Below shows the  [Uninstallation procedure] for your uninstallation.


  <<Uninstallation procedure>>
    In order to delete the driver entirely from the other OS, perform the 
    following procedures to delete both the driver and the driver package.
    Please note that execution of driver uninstall tool does not delete the 
    driver package.

    (1) Click the [Start] button, select [Control Panel] > [Devices and Printers].

    (2) Delete the printer icon inside the [Devices and Printers] window.

    (3) After selecting any printer in the [Devices and Printers] window, select 
        [Print server properties] from the menu. The [Print server properties] 
        window will appear.

    (4) From the [Drivers] tab, click [Change Driver Settings].

    (5) From the [Drivers] tab, select the driver to delete and click the 
        [Remove...] button.

    (6) Select [Remove driver and driver package] and click the [OK] button.

    (7) To uninstall all the drivers, repeat (2) to (6) until all the printers 
        are replaced from the [Driver] tab in [Print Server Propoerties]. Refer 
        to 1.2 Printer.

    (8) Restart the computer.

   Uninstallation is completed.

  <<Installation procedure>>
   Follow the instructions below for uninstalling the Driver.

    (1) In the OS, select [Control Panel] > [Devices and Printers]
        and open the [Devices and Printers] window. Click [Add a printer].

    (2) [Add Printer] dialog box opens. Select either of [Add a local printer] or 
        [Add a network, wireless or Bluetooth printer] depending on your 
        environment.

        - [Add a local printer or netowrk printer with manual settings])
          Normally select this. Standard TCP/IP Port (LPR) connection or print 
          to file can be used. Serial or Centronics output is not supported with 
          this driver.

        - [Select a shared printer by name])
          Select this to output to the printer via another computer.
          It is required to select a local printer and install the driver to 
          the printer server prior to use.
          You need to have access rights to the computer (printer server) that 
          connects to the printer.

        If you select [Add a local printer], follow the procedure from (3) 
        onwards to install the driver.

        If you select [Add a network, wireless or Bluetooth printer], confirm 
        with your network administrator on how to specify the printer.
        A dialog box to confirm wheter to continue installation is displayed.
        Click [Continue] to continue.

        If [User Account Control] dialog box appears, click [Continue]. If you 
        are installing the driver as a general user, select a user account 
        which has administrative access rights, and enter password to continue 
        installation.

        This is the end of the installation. Procedures (3) and later are not 
        required.

    (3) Select the port which you want to use with this driver from [Choose a 
        printer port] and click [Next].
        The procedure for adding a port is described in "1. Add a port" under 
        "4. Network connection".

       <Note>
       -Refer to "4. Network connection" for details on network connection.

    (4) A list of printers is displayed. Click [Have disk] to open the [Install 
        from Disk] window. Click [Browse] and select the folder where the driver 
        is saved, and click [Open]. If it is correct, click [OK].

    (5) Available printer model names will be displayed. Select the model to be 
        used, and click [Next] button.

    (6) Enter the printer name and click the [Next] button.

    (7) This starts the printer installation. Midway, [Windows can't verify the 
        publisher of this driver software] will be displayed but this will not 
        cause any problems. Select [Install this driver software anyway] to 
        continue the installation.

    (8) Select whether to share the printer. Click [Next] after the selection.

        - [Share this printer so that others on your network can find and use it]
          If shared, it becomes a printer driver and other Windows PC can connect 
          to this computer. When sharing, enter the shared name.
          Moreover, if you have other versions of Windows, or drivers of other 
          CPU types, you can save to the printer server by clicking [Additional 
          Drivers] from the [Sharing] tab of the device properties dialog box 
          of the printer after installing the driver.

        - [Do not share this printer]
         Normally select this.
         
    (9)	Print a test page to confirm whether the driver has been installed 
        correctly.
        Check the [Set as the default printer] box if you want to use the printer 
        as the default printer. The default printer setting can be changed later.
        Click [Print a test page]. [A test page has been sent to your printer] 
        dialog box is displayed. Click [Close] and [Finish].

        <Note>
        If [FILE:] has been specified as an output port, do not print test page.

    (10) Restart the computer.


4. Network connection

 --1. Add a port--

   It is required to set the printer queue to be the logical printer (*1)
   so to print directly from an application software. The followings are the 
   procedures on how to set.

    1) At "3. Installation / Uninstallation of the Driver", select [Add a 
       local printer] and perform the steps (1) and (2).

        To create a new port, follow the procedures 2) to 6) described below.

    2) Select [Create new port], and select [Standard TCP/IP Port] and click 
       [Next].

    3) Select [TCP/IP Device] from [Device type], and enter printer name or IP 
       address in [Hostname or IP address]. At the same time, [Port name] is 
       entered automatically. If necessary, change manually.
       After entering the name, click [OK].

    4) [Additional Port Information Required] is displayed. Select [Custom] and 
       click [Settings...].

    5) [Configure Standard TCP/IP Port Monitor] is displayes. Select [LPR] in 
       [Protocol], enter logical printer name (*1) in [Queue Name], and check on 
       [LPR Byte Counting Enabled]. [SNMP Status Enabled] must not be checked on. 
       After entering above, click [OK].

    6) It goes back to step 4) screen. Click [Next].
       Port setting has been completed.
       Go back to "3. Installation / Uninstallation of the Driver", Step 4).

    *1 Logical Printer
       The virtual printer setting that can be stored in the printer.
       The available logical printer names are 'plt00t' to 'plt99t'
       (or 'PLT00T' to 'PLT99T').
       Refer to the Printer User Guide or the online Help of CentreWare Internet 
       Services for detail.

 --2. Spool Setting--

   When printing by LPR, a part of the image may be missing.
   In this case, changing the spool setting in the following manner may resolve 
   the problem.

    1)Select the printer to change setting from [Printer] folder, and select 
      [Properties] from file menu to open Printer Properties.

    2)Select [Advanced] tab, and select [Spool print documents so program 
      finishes printing faster], and select [Start printing after last page is 
      spooled].

    3)Uncheck [Enable advanced printing features].

    4)Click [OK].


5. Installing drivers using the installation tools

   Download the [Drivers with installation tools] from the FUJIFILM Internet 
   download website.

   The downloaded file is in the self-extracting format. The file will 
   self-extract and menu will be displayed upon double-clicking. Clicking 
   [Standard] from this menu will search the computer for available printers for 
   installation, and user will be prompted to install this driver.
   [Update printer driver] will prompt the user to update the printer driver if 
   the PC is already installed with an older version of the driver.

   Make sure to check the [Enable] selection of the SNMP settings of the printer
   when using the installation tool.
   Refer to the following steps for the SNMP settings.
   
   [SNMP settings for AW3030 / AW6050]
   
     (1) Start a browser, such as Microsoft Edge and enter the URL of the printer 
         (http://host name or IP address) and press [Enter].
         Internet Service's top page is displayed.

     (2) Click [Login] button.
         Enter user name and password on the dialog box, and click [OK].
         For the user name and password, please ask the system administrator.

     (3) Click [Properties] tab.
         Select [SNMP].

     (4) Check on [Enable] of [SNMP], and click [Apply] button.

     This completes SNMP setting.

   For the detailed information about Internet Services, refer to the Print 
   Services on Web online help.
   
   [SNMP settings for DW2055 / DW3030]
   
     (1) Start a browser, such as Microsoft Edge and enter the URL of the printer 
         (http://host name or IP address) and press [Enter].
         Print Services on Web top page is displayed.

     (2) Click [Administrator page] button.
         Enter user name and password on the dialog box, and click [OK].
         For the user name and password, please ask the system administrator.

     (3) Click [Properties] tab.
         Select [SNMP].

     (4) Check on [Enable] of [SNMP], and click [Apply] button.

     This completes SNMP setting.

   For the detailed information about Print Services on Web, refer to the Print 
   Services on Web online help.

   [SNMP settings for the other models]

     (1) Start a browser, such as Microsoft Edge and enter the URL of the printer 
         (http://hostname, IP address or [IPv6 address]) and press the [Enter].
         CentreWare Internet Services on Web top page is displayed.
     
     (2) Click [Login] button.
        Enter User ID and password on the dialog box, and click [OK]. For the 
        User ID and password, please ask the system administrator.

     (3) Click [Properties] tab.
        Select [Port Status] in [Network Settings] when the properties menu is
        displayed.

     (4) Check on [Enable] of [SNMP], and click [Apply] button.

     This completes SNMP setting.

     For the detailed information about CentreWare Internet Services, refer to 
     the CentreWare Internet Services online help.

     <Things to take note>
     *All other driver versions of the printer icon using this driver will be 
      updated once you carry out updating using [Driver update].
      This is a characteristic of the driver.


6. Limited Warranties

   This software product was developed with due care about safety.
   FUJIFILM shall in no event be held liable for user damage caused by this 
   program.

 * Microsoft is a registered trademark of Microsoft Corporation (USA).
 * Windows is a trademark of Microsoft Corporation (USA).
 * Intel is a registered trademark of Intel Corporation (USA).
 * Xerox, Xerox and Design, as well as CentreWare are registered trademarks or 
   trademarks of Xerox Corporation in Japan and/or other countries.
 * The company and product names are generally trademarks or registered 
   trademarks of their corresponding companies.
